Apex Mass Flow Controller can measure many gases that can be found in the on-board library of gases. One gas should be specified for the primary gas calibration. The Apex Mass Flow Controller Aggressive Gas Series adds all the standard gases plus a number of aggressive and refrigerant gases to the on-board gas library.
A 115V/60Hz power cable(PVPS24U) is available to power the unit.
The Apex Mass Flow Controller can be set via the on-board display or via 0-5V, 0-10V or 4-20 mamp signals. For the end user, flows can be read and the controller set via the on-board display. FlowVision Software can be purchased for using a computer to record and graph the flows. The gas selection can also be made from the computer.
For use with a system, a 6 ft. cable(DC-61) or a 25 ft. cable(DC-251) can be purchased in the communication cable section. One end is the 9 pin Din connector to connect to the Apex MFC, while the other end are blank wires.
Calibration Gas - Gas used for factory calibration. There are 30 on-board gases on each mass flow controller that can be chosen as the gas measured. The unit is in calibration for any of the gases in the library.
Flow Rate- Full scale flow rate of the mass flow meter. Turndown ration is 200:1
Output - Output of the mass flow controller can be in the form of 0-5V, 0-10V or 4-20 mAmps. Every Apex device has RS-232 capability and does not need to be specified.
Secondary Output - Second output capability. This output can be the mass flow rate, temperature, pressure or volumetric flow rate.
Special Gas Connectors - We can provide a welded VCR female fitting on the gas inlet and output of the meter.
Industrial Connector Option - Controller can be outfitted with a screw on industrial connector for more secure fit on the communications cable. Supplied with a 10 ft. industrial connector cable.
Totalizer - On-Board display of the total flow from the last tare of the unit.
TFT Display - Add TFT Screen for easier reading in low light levels and at times when the screen is viewed at an angle.
- Item #: AX-MCS-D